Filter
Top Products
3 Copying a Page 9
Preferred capture path
For Normal or Graphics mode
For best results using Normal or Graphics mode, use a U-shaped path
when capturing pages.
Be sure to keep the HP CapShare appliance in constant contact with
the page you are capturing. Lift the appliance from the page to end the
capture.
For Flip Chart mode
For the best results when capturing flip charts, use a side to side
motion, copying only the portions of the page that contain
information.
Pages copied in this mode are reduced to 25% of their original size.
Therefore, letter-size pages copied in this mode are too small to read.
Other capture paths
You can also use other capture paths, as long as the total capture area does not exceed 119
square inches (767.55 square cm) when in Normal or Graphics mode or 13 square feet (1.2
square meters) when in Flip Chart mode. You may need to rotate the page on the
appliance screen after capturing when using alternative capture paths.
Joaquin.book Page 9 Wednesday, July 28, 1999 3:32 PM