HP (Hewlett-Packard) HP CapShare 920 Copier User Manual


 
10 3 Copying a Page
Capture tips
Do not turn the HP CapShare appliance
The HP CapShare appliance can be turned only up to 45 degrees while capturing a page.
To copy a page successfully, use the preferred U-shaped path and keep the display facing
the same direction for the entire capture.
How to prevent skewed pages
The appliance will automatically attempt to straighten crooked (skewed) images. Any page
skewed too much will be left unchanged. To avoid unwanted skew, make sure that the HP
CapShare appliance is placed on the page with the base parallel to the top of the page,
and slide the appliance toward you following the straight edge of the page.
Note
If the display shows a skewed thumbnail, copy the page again with the appliance placed
parallel to the edge of the page.
Capture sleeve
For
Small documents that are hard to hold
High-gloss documents
Documents that are too dark
Wrinkled documents
To capture with the sleeve
1 Place document in the capture sleeve with image side facing the transparent sheet.
2 Place on a smooth flat surface, and capture through the transparent surface.
An overhead projector slide or a photocopy of the original may work as well.
Joaquin.book Page 10 Wednesday, July 28, 1999 3:32 PM