Filter
Top Products
Removal and Installation
8-45
HP DesignJet 430, 450C and 455CA Printers
Reinstalling the Drive Roller
In the following procedure, take care not to injure your fingers
if you let the drive roller snap into place.
In the following procedure:
D Take care not to damage the media separator. Don't let it slip under the
drive roller.
D Take care that the edge of the media separator does not damage the
rubber surface of the drive roller.
1. Position the Drive Roller on top of the pinch wheels.
2. Make sure that the gear on the left side of the roller is positioned
immediately to the left of the sideĆplate.