Filter
Top Products
4. Grasp both sides of the print cartridge and
distribute the toner by gently rocking the print
cartridge.
CAUTION: Do not touch the shutter or the
surface of the roller.
5. Remove the shipping lock and the shipping
tape from the new print cartridge. Discard the
lock and tape according to local regulations.
6. Align the print cartridge with the tracks inside
the product, insert the print cartridge until it is
firmly seated, and then close the top cover.
After a short time, the control panel should
display the Ready message.
7. Installation is complete. Place the used print
cartridge in the box in which the new cartridge
arrived. See the enclosed recycling guide for
recycling instructions.
8. If you are using a non-HP print cartridge,
check the product control panel for further
instructions.
98 Chapter 7 Print cartridges ENWW