Filter
Top Products
CHAPTER 14 BROTHER NETWORK PC FAX SOFTWARE
14-2
Installing Network PC Fax
Insert the CDROM supplied with your Brother MFC, the installer screen will
automatically start. From the installer screen select your model and language (if
these options are present), then select Network Applications for (optional NC-
8100h Print / Fax Server), then select Brother PC Fax and follow the screen
prompts. When prompted reboot your PC.
It is now necessary to install the Brother Network Print Software from the
CDROM so you need to reinsert the CDROM. Select Network Applications for
(optional NC-8100h Print / Fax Server), then select Network Print Software.
Follow the screen prompts, you will prompted for the IP address of the NC-
8100h. If in any doubt contact your Network Administrator.
Note: If you have already installed the MFC as a network printer you may have
already installed the Brother Network Print Software.
To check select Start | Settings | Printers.
Highlight the Brother PC Fax driver from the list and right click the mouse
button and select properties then select the details tab.
Select the “Print to Following Port” as illustrated above, if Brother LPR Port is
listed for your MFC you can just specify for Brother Network Fax to use this
previously installed port. If you have multiple Brother LPR ports please ensure
that you select the correct port address. If in any doubt please contact your
Network Administrator.
Important Information:
If the installer screen does
not appear automatically
select Start | Run and type
X:/setup.exe
(X:/ should be the drive
letter of your CD ROM
drive on your PC).