Filter
Top Products
CHAPTER 2 FRONT PANEL SETUP MENU
2-9
5-MAILBOX PWD
1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [2] [5].
4. Select [1] to change the Mailbox password—OR—[2] to exit.
5. Enter the user password assigned to the MFC to login to the POP3
Server. Please note that this password is case sensitive.
6. Press [Set] to accept the selection.
7. Press [Stop/Exit] to exit the configuration menu.
3-Setup Mail RX
This menu has Five selections 1-Auto Polling, 2-Poll Frequency, 3-Header, 4-Del
Error Mail and 5-Notification.
1-AUTO POLLING
1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [3] [1].
4. Press ! or " to select On or OFF.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.
AUTO POLLING
When set to ON the MFC automatically will check the POP3 server for new
messages. “NO MAIL” will be displayed if there are no E-mail messages when
the POP3 server is polled.
2-POLL FREQUENCY
1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [3] [2].
4. Enter the polling frequency.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.
POLLING FREQUENCY
Sets the interval for checking for new messages on the POP3 server (default is
10min).
3-HEADER
1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [3] [3].
4. Press ! or " to select SUBJECT+FROM+TO or ALL or NONE.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.