Filter
Top Products
CHAPTER 2 FRONT PANEL SETUP MENU
2-12
5-Setup Relay
This menu has three selections 1-RLY Broadcast, 2-Relay Domain and 3-Relay
Report. For details on Relay Broadcast refer to Chapter3, How to use the Web-
Based Management Utility or Chapter 4 Internet Fax.
1-RLY BROADCAST
1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [5] [1].
4. Press ! or " to select ON or OFF.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.
RELAY BROADCAST
This function allows the MFC to receive a document over the Internet, and then
relay it to other fax machines through conventional analog landlines.
2-RELAY DOMAIN
1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [5] [2].
4. Press ! or " to select the Relay Domain (01 – 10).
5. Press [Set] to accept the selection.
6. Enter the Relay Domain name for the Domain that is being allowed to
request a Relay Broadcast.
7. Press [Set] to accept the selection.
8. Press [Stop/Exit] to exit the configuration menu.
RELAY DOMAIN
You can register the Domain Names (Max.10) that are allowed to request a Relay
Broadcast.
3-RELAY REPORT
1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [5] [3].
4. Press ! or " to select ON or OFF.
5. Press [Set] to accept the selection.
Relay Broadcast Report can be printed at the MFC used as the Relay Station for
all Relay Broadcasts. Also, when the MFC is used with the Brother Network PC
Fax software the MFC is acting as a Relay Station for fax transmissions from the
network so a Relay Report can also be printed for confirmation of sent network
faxes.
Its primary function is to print reports of Relay Broadcasts from external sources
through the MFC. Please note that this is not possible without the consent of the
Relaying Station as permission in the form of Relay Domain has to be given to
external parties.