Filter
Top Products
Light description/Light pattern Explanation and
recommended action
again, and resend the
print job.
Resume light blinks, left and right print cartridge lights cycle. Media jam or switch
motor stall.
Clear the jammed
paper. For more
information, see
Clear
jams. After clearing the
jam, press
(Resume button) to
continue the print job.
If no paper jam exists,
press
(Resume
button). If this does not
work, try turning the
printer off and then on
again, and resend the
print job.
Power light on, resume light blinks, right print cartridge light turns on
twice as long as off.
Ink service module
almost full.
•
If you have a
replacement for
the ink service
module, replace it
immediately by
following the
instructions that
came with it.
•
Otherwise, visit:
www.hp.com/
support or contact
Customer Support
to get a
replacement. See
Support and
warranty.
In the meantime,
you can press
(Resume button)
to continue
printing, but this
light error state will
remain until the ink
service module is
replaced. When
the ink service
module is full, the
printer will stop
printing.
(continued)
Interpret control-panel lights
99