Filter
Top Products
50 • C/C++ Library
W_9111_INT_Set_Reg (ByVal cardNo As Integer, ByVal INTC As
Integer) As Integer
@ Argument
cardNo: The card number of PCI-9111 card initialized
INTC: The value written to the interrupt control register
@ Return Code
ERR_NoError
5.23 _9111_INT_Get_Reg
@ Description
This function is used to get the AD mode setting and interrupt control
setting by reading data from A/D mode and interrupt control read back
register. The returned settings are stored in INTC. Please refer to section
4.7 and section 4.9 for the detailed definition of each bit of the returned
data.
@ Syntax
C/C++ (DOS)
U16 _9111_INT_Get_Reg (U16 cardNo, U16 *INTC)
C/C++ (Windows 95)
U16 W_9111_INT_Get_Reg (U16 cardNo, U16 *INTC)
Visual Basic (Windows 95)
W_9111_INT_Get_Reg (ByVal cardNo As Integer, INTC As Integer)
As Integer
@ Argument
cardNo: The card number of PCI-9111 card initialized.
INTC: The value returned from interrupt control register.
@ Return Code
ERR_NoError
5.24 _9111_Reset_FIFO
@ Description
The PCI-9111 A/D data are stored in the FIFO after conversion. This
function is used to reset A/D FIFO. This function should be called before
performing A/D conversion to clear the old data stored in the FIFO.
@ Syntax
C/C++ (DOS)
U16 _9111_Reset_FIFO (U16 cardNo)
C/C++ (Windows 95)
U16 W_9111_Reset_FIFO (U16 cardNo)