Filter
Top Products
72 • Software Utility
Figure 8.2 A/D with Polling Test Window
7.2 I_EEPROM
This file is used to enable or disable the interrupt of PCI-9111 board. This
software is a text-driven program. Because the default interrupt on
PCI-9111 board is “on”, users who doesn’t want to use interrupt function
can use this utility to turn off the interrupt of their PCI-9111 board.
After finishing the DOS installation, you can execute the utility by
typing as follows:
C> cd \ADLINK\DOS\9111\UTIL
C> I_eeprom
At first, this program prompts you to input the card type —9111. After
specifying the card type, this program shows the instructions to guide you
to enable or disable the interrupt of your PCI-9111 board.