Filter
Top Products
VA 7100/7400 Cluster Installation Guide
10/12/01 19
AutoPath Setup
To set up AutoPath for Windows 2000, proceed as follows:
1. Ensure that AutoPath for Windows 2000 software has been installed. Refer to the Hardware Connections and
Applicable Documents/Reference Material paragraphs of chapter 2.
2. On the desktop display, click the Start HP Auto Path Server/Client icon. The HP AutoPath - Adapters
window appears, as shown below. Verify that the Fibre Channel host adapters are listed under Adapter # and
Adapter Name. Then, click Devices.
3. The HP AutoPath - Devices window appears, as shown below. Verify that those VA LUNs that have been
configured are listed under Device # and Device Name. Then, click on one of the devices listed.