Filter
Top Products
To set or change the number of rings-to-answer, use the following steps:
1.
From the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Basic Fax Setup menu.
4. Touch the Rings to Answer button.
5. Use the keypad to enter the number of rings, and then touch the Done button.
Set distinctive ring
Ring-pattern or distinctive-ring service is available through some local telephone companies. The
service allows you to have more than one telephone number on a single line. Each telephone number
has a unique ring pattern, so that you can answer voice calls and the product can answer fax calls.
If you subscribe to a ring-pattern service with a telephone company, you must set the product to
answer the correct ring pattern. Not all countries/regions support unique ring patterns. Contact the
telephone company to determine if this service is available in your country/region.
NOTE: If you do not have ring-pattern service and you change the ring-pattern settings to
something other than the default, All Rings, the product might not be able to receive faxes.
The settings are as follows:
●
Ring Pattern Detection: Turn off or on the product's ring pattern detection capability.
●
All Rings: The product answers any calls that come through the telephone line.
●
Single: The product answers any calls that produce a single-ring pattern.
●
Double: The product answers any calls that produce a double-ring pattern.
●
Triple: The product answers any calls that produce a triple-ring pattern.
●
Double and Triple: The product answers any calls that produce a double-ring or triple-ring
pattern.
To change ring patterns for call answering, complete the following steps:
1.
From the Home screen, touch the Setup
button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Fax Setup menu.
4. Touch the Distinctive Ring button, and then touch the name of an option.
Use autoreduction for incoming faxes
The factory-set default for incoming fax autoreduction is On.
If you have the Fax Stamping option turned on, you might also want to turn on autoreduction. This
reduces the size of the incoming faxes slightly, and prevents the page-stamp from forcing a fax onto
two pages.
ENWW
Set fax settings
137