Filter
Top Products
imaging environment — ultimately increasing business productivity by helping you save time, control
costs, and protect your investment.
HP Web Jetadmin updates are periodically made available to provide support for specific product
features. Visit
www.hp.com/go/webjetadmin and click the Self Help and Documentation link to learn
more about updates.
Product security features
Security statements
This product supports security standards and protocols that help secure the product, protect
information on your network, and simplify monitoring and maintenance of the product.
For information about HP's secure imaging and printing solutions, visit
www.hp.com/go/
Secureprinting. The site provides links to white papers and FAQ documents about security features
and may include information about additional security features that are not contained in this
document.
Assign an administrator password in the HP Embedded Web Server
The HP Embedded Web Server allows you to assign an administrator password so that unauthorized
users cannot change product configuration settings in the HP Embedded Web Server. When the
admin password is assigned and applied, you must enter the password to make any configuration
changes that are done through the HP Embedded Web Server. If you change an existing password,
you must first enter that password. You can also remove the password by entering the existing
password and then deleting the assigned password.
Control Panel Lock
The HP Embedded Web Server allows the ability to lock certain features on the product’s control
panel to prevent unauthorized use. Once the control panel lock is enabled, certain control panel
configuration features cannot be changed from the control panel. The control panel lock setting itself
can also be secured. This is accomplished by setting the HP Embedded Web Server administrator
password. Once the HP Embedded Web Server administrator password is set, the admin password
must be entered when accessing the control panel lock enable/disable setting.
Disable unused protocols and services
The HP Embedded Web Server allows the ability to disable unused protocols and services. These
protocol and services settings can also be protected from being changed by setting the EWS admin
password. These protocols and services include the following:
●
IPv4 and IPv6 disable/enable: To operate properly on a TCP/IP network, the product must be
configured with valid TCP/IP network configuration settings, such as an IP address that is valid
for your network. This product supports two versions of this protocol: version 4 (IPv4) and
version 6 (IPv6). IPv4 and IPv6 can be enabled/disable individually or simultaneously enabled.
● Bonjour disable/enable: Bonjour services are typically used on small networks for IP address
and name resolution where conventional a DNS server is not used. The Bonjour service can be
enabled or disabled.
ENWW
Product security features
177