Filter
Top Products
Turning the projector on and off 23
Turning the projector on and off
Turning the projector on
1. Be sure the power cord is connected and the disconnect switch is on.
2. Remove the lens cover
1.
3. Press the power button
2 on the projector or on the remote control.
The projector takes a minute or so to warm up. The power button blinks during warm-up.
TIP: If the picture does not appear on the screen, try the following:
• If you are using a computer, press the key combination that turns on its video output. For
example, press F
N+F4 or FN+F5 on some computers.
• On the projector, press the source button one or more times to select the correct input port.
NOTE: It is normal for parts of the projector and the air coming out of the projector to be very
warm. If the projector starts to overheat, the temperature warning light will turn on and the
projector will shut down.