Filter
Top Products
Connecting to a room controller 51
TNT –45 to 45, +, –, ? Sets or queries the tint.
RADJ –50 to 50, +, –, ? Sets or queries the amount of red.
GADJ –50 to 50, +, –, ? Sets or queries the amount of green.
BADJ –50 to 50, +, –, ? Sets or queries the amount of blue.
CTMP 0 to 2, ? Sets or queries the color temperature: 0=warm, 1=neutral,
2=cool.
SHRP 0 to 12, +, –, ? Sets or queries the sharpness.
PENH 0 to 6, +, –, ? Sets or queries the picture enhancement setting.
KEYV –50 to 50, +, –, ? Sets or queries the vertical keystone: 0=no keystone
adjustment, 1 to 50=shrinks the top of the display,
–1 to -50=shrinks the bottom of the display.
ASPT 0, 1, 4, ? Sets or queries the aspect ratio: 0=1-to-1, 1=Best Fit,
4=Reduced.
SYNC None Automatically resynchronizes the projector to the active
computer input source.
FREQ –50 to 50, +, –, ? Sets or queries the projector’s timing relative to the active
computer input source.
TRK value, +, –, ? Sets or queries the synchronization of the projector to the
active computer input source.
VPOS value, +, –, ? Sets or queries the vertical positioning of the projected
image: usable range is the maximum and minimum allowed
by the active computer input source.
HPOS value, +, –, ? Sets or queries the horizontal positioning of the projected
image: usable range is the maximum and minimum allowed
by the active computer input source.
HIDE 0, 1, ? Sets or queries picture blanking: 0=not hidden, 1=hidden.
WIDE 0, 1, ? Sets or queries wide screen mode: 0=normal, 1=wide.
KEYR None Resets keystone to zero.
Video functions (continued)
Command Parameters Description