HP (Hewlett-Packard) XT9ZZ Personal Computer User Manual


 
16
hp pavilion home pc
Filename: ma1rwtc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc.
Revision #: 161 Page: 16 of 46 Printed: 04/26/01 09:20 AM
To reassemble the computer:
1
Replace the side panel (see Replacing the
Side Panel on page 23).
2
Reconnect the power cord and all other
cables.
3
Reconnect the modem/phone cable.
4
Turn on the computer and all peripherals.
5
Install any software drivers supplied by the
drive manufacturer.
Removing the Preinstalled Hard
Drive
You need to remove the hard drive from the
chassis if you want to replace it with a higher-
capacity drive or if you want to safeguard your
data when sending the computer out to be
repaired.
To remove the preinstalled hard drive:
1
Turn off the computer and all peripherals.
2
Disconnect the modem/phone cable.
3
Disconnect the power cord and all other
attached cables (such as the keyboard, mouse,
and monitor).
4
Remove the side panel (see Removing the
Side Panel on page 4).
5
Remove the drive cage (see Removing the
Drive Cage on page 6).
6
Remove the two screws on the top of the hard
drive and the one screw on the bottom of the
hard drive.
7
Pull the hard drive out, and store the drive and
screws in a safe location.
8
Replace the drive cage and the side panel (see
Closing the Computer on page 21).