Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–7
5. Remove the hard drive by following these steps:
a. Position the notebook with the rear panel toward you.
b. Loosen the 2 black PM2.0×5.0 screws 1 that secure the
hard drive cover to the notebook.
c. Lift the right side of the cover and swing it to the left 2.
d. Remove the hard drive cover.
✎
The hard drive cover is included in the Miscellaneous
Plastics Kits, spare part numbers 382400-001 (for use on
HP Pavilion ze2000 models) and 382401-001 (for use on
Compaq Presario M2000 models).
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
80-GB (4200-rpm; includes frame and connector)
60-GB (4200-rpm; includes frame and connector)
40-GB (4200-rpm; includes frame and connector)
381398-001
381397-001
381396-001