Filter
Top Products
GR2K-GA-0008 3-1
Rev. 1.00
Chapter 3
Basic Operations
This chapter shows examples of the commands required for connecting the
GR2000-B to other devices. The chapter contains the following sections:
Configuration examples
Startup of the GR2000-B
Configuration setting
Display of the operation status
Details about the commands introduced in this chapter
More details about the operation
3.1 Configuration Examples
Using the example below, this section explains about the simple method of setting
configurations.
Figure 3-1 Example of a GR2000-B Connecting to Other Devices
To construct the configuration above in Figure 3-1, set the GR2000-B according to
the following instructions:
Set IP address "192.168.1.1" for PORT 0 of the GR2000-B built-in Ethernet.
Set IP address "192.168.2.1" for PORT 1 of the GR2000-B built-in Ethernet.
Set IP address "192.168.2.2" for a default route (in case that the IP address
"192.168.2.2" is set for the port of the peer router.)
Built-in Ethernet
Port
IP 192.168.2.1
Built-in Ethernet
Port 0
IP
192.168.1.1
GR2000-B
Server
PC
PC
PC
PC
Network A
Network B
Network C
Peer Router