Filter
Top Products
Access PrePack System Operator Manual
Using the Access PrePack System 3-18 F-35512 (Mar. 2006)
Settings Drop-Down Menu
The Setting Drop-Down Menu has the following selections:
Wrapper Screen
(only available when system connected to UWS)
Printer Settings Screen
Date and Time Screen
Total Type Screen
Rezero Weigher Screen
Settings Drop-Down -
Wrapper Screen
From the Operator Main Menu Screen, TOUCH Settings.
TOUCH Wrapper. You should now be on the Wrapper Screen.
To change the Intake Mode
: TOUCH the Intake Mode field and
bring up the Intake Mode drop-down selections either Normal,
Default, or Gentle.
To turn on/off the Sealer Belt
: TOUCH the Sealer Belt field and
SELECT either On or Off.
To change the Belt Temperature
: TOUCH the Belt Temperautre
Setting field. The Numeric Keypad will be displayed. TYPE the
Belt Temperature Setting on the Numeric Keypad. TOUCH Enter.
To change Film Tension
: TOUCH the Film Tension field and
SELECT either High, Medium, or Low.
To change the Film Width
: TOUCH the Film Width field and
SELECT either Narrow, Wide, or Automatic.
To load Wide Film
: TOUCH the Load Wide Film button.
To load Narrow Film
: TOUCH the Load Narrow Film button.
To cut the Film
: TOUCH the Cut Film button.
To exit this screen
: TOUCH Back.