Filter
Top Products
3 - 5
Beeper and LED Sequences and Meaning
The scanner contains LEDs on the rear of the unit that indicate linking status, decoding state, and battery condition. The base
has LEDs on the top of the unit that indicate its power up, communication, and battery charge condition. The red LED = error;
green LED = success of any type. Scanners and the CCB01-010BT base have audible indicators as well: 1 razz or error tone =
error; 2 beeps = menu change; 1 beep = all other successes.
The table below lists the indication and cause of the LED indication, beeps, and vibrations for the scanner.
Scanner LED Sequences and Meaning
Base/Access Point LED Sequences and Meaning
The base contains a red LED and the Access Point has a blue LED that indicate the status of the unit and verifies its com-
munication with the host system. The base also has a green LED that indicates scanner battery charge condition.
Base Power Communication Indicator
To display the power indicator on a base or an Access Point, scan the Base Power Communication Indicator On bar
code. To turn off the power indicator, scan the Off bar code. Default = On.
LED Indication Beeper Indication Vibrate Indication Cause
Normal Operation
Red Flash None None Battery low
Green Flash 1 beep None Successful communication or linking
Red, blinking Razz or error tone None Failed communication
Menu Operation
Green Flash 2 beeps 2 vibrations Successful menu change
Red, blinking Razz or error tone 1 long vibration Unsuccessful menu change
Red or Blue LED - Host Communication
Red or Blue LED Communication Condition
Off USB suspend
On continuously Power on, system idle
Short blinks in multiple pulses. Occurs while transferring data to/
from the RF module or the Host port.
Receiving data
Green LED - Scanner Battery
(base only, does not apply to Access Point)
Green LED Charge Condition
Off Battery not detected or charge suspended
Slow flash, 1 second on, 1 second off Pre-charge and charging
On continuously Charge complete
Fast flash, 300 mSec on, 300 mSec off Charge Error
* Base Power Communication
Indicator On