Filter
Top Products
12
the
you can enable or disable the wireless network function through the
wireless network function, do
oose
Basic
>
Wireless Lan
.
Step 3
Select the
Enable
or
Disable
option button of
Access Point
.
wireless network function in the same way. The WLAN indicator shows whether
wireless network function is enabled.
In addition,
Web-based configuration utility. To enable or disable the
as follows:
Step 1
Log in to the Web-based configuration utility.
Step 2
In the navigation tree on the left, ch
Step 4
Click
Submit
to save the settings.
5.3
Changing the Wireless Network Name and
the Access Password
To change the name and access password for the wireless network, do as follows
th
n combo box.
mbo box.
Step 6
Enter an access password in the
Pre-Shared Key
text box.
(taking e authentication type WPA-PSK as an example):
Step 1
Log in to the Web-based configuration utility.
Step 2
In the navigation tree on the left, choose
Basic
>
Wireless Lan
.
Step 3
Enter a wireless network name in the
SSID
text box.
Step 4
Select
WPA-PSK
from the
Authentication Type
drop-dow
Step 5
Select
TKIP
from the
Encryption
drop-down co
Step 7
Click
Submit
to save the settings.
5.4
Changing the IP Address Used for Logging
In to the Web-Based Configuration Utility
mber, you can change the IP address after
To change the IP address, do as follows:
the
Main IP Address
text box. Then,
enter a subnet mask in
Main Subnet Mask
.
Step 3
Click
Submit
to save the settings.
To make the login IP address easy to reme
logging in to the Web-based configuration utility.
Step 1
Choose
Basic
>
LAN Setting
in the navigation tree to display the LAN
settings page.
Step 2
Enter a new IP address as desired in