Filter
Top Products
13
To log in to the Web-based configuration utility after you change the IP
address successfully, you need to launch the Internet Explorer, and then
enter the new IP address in the address bar. Ensure that the IP address of
the computer is in the same network segment as that of the HG520c so
that the computer can access the Web-based configuration utility.
5.5
Restoring Default Settings
You can quickly restore the default settings of the HG520c by pressing the RESET
button on the rear panel. To restore the default settings, press and hold the RESET
button for over six seconds after the HG520c is powered on, and then release the button.
In addition, you can restore the default settings of the HG520c through the Web-based
configuration utility. To restore the default settings through the Web-based
configuration utility, do as follows:
Step 1
Log in to the Web-based configuration utility, and then choose
Tools
>
Reboot
in the navigation tree to display the reboot page.
Step 2
Select
Factory Default Settings
.
Step 3
Click
Restart
.
After the preceding operations, the current page jumps to the login page. You can log in
to the Web-based configuration utility by entering the default user name and password
that are admin.
6 FAQs
How can I quickly enable or disable the wireless network function?
Press and hold the WLAN button for over one second, and then release the button to
enable or disable the wireless network function. The WLAN indicator shows
whether the wireless network function is enabled.
How can I quickly restore the default settings of the terminal?
To restore the default settings, press and hold the RESET button on the rear panel
for over six seconds after the HG520c is powered on, and then release the button.
What can I do if I cannot access the Internet through the terminal?
Step 1
Check whether the POWER indicator on the terminal is solid on.
If the POWER indicator is off, perform further checks as follows:
1. Ensure that the terminal is turned on.
2. Ensure that electricity comes from the socket and that the power input
from the socket meets the requirements described on the label of the