Filter
Top Products
Description of destination pageDestinationButton
Displays statistics about received data and receive connection
status. For more information see Reception Information page
on page 15.
Reception Information pageReception Info
Displays statistics about the transmitted data and transmit
connection status. For more information see Transmission
Information page on page 16.
Transmission Information pageTransmission Info
Displays detailed information about the operational status of
the satellite modem. For more information see Terminal Status
page on page 17.
Terminal Status pageTerminal Status
Displays system information such as ST Name (assigned name
of the satellite modem name) and operational software version.
System Information pageSystem Info
For more information see System Information page on page
19.
System Status button
The System Status button (only) is a status indicator as well as a link. It changes color to indicate the satellite modem's
current status, as explained in Table 4: Meaning of System Status button colors on page 12. To see more detailed status
information, click the System Status button to open the System Status page.
Table 4: Meaning of System Status button colors
MeaningButton color
OK – The satellite modem is operating normally.
Green
Degraded – Degraded means performance is degraded for any of the following reasons:
Yellow
• The Web Acceleration not functioning or in progress. Web Acceleration may be
temporarily inactive while you are browsing on a secure HTTP site (https).
• The modem is in fallback mode.
• A number of transmissions beyond a certain threshold have not been received by
the satellite (state code 30). This could be caused by weather conditions.
FAP threshold exceeded – The satellite modem has exceeded the FAP threshold specied
in the HughesNet service plan. Subscribers who exceed the threshold experience reduced
download speeds for approximately 24 hr.
Orange
Problem detected – There is a problem with satellite transmit or receive connectivity
or both.
Red
If the System Status button is red or yellow , you can look for a red ag next to any value or values on the System
Control Center information pages (those with tables listing parameters and values). The red ag indicates a problem
related to the parameter listed next to the agged value. Click the parameter name to see a pop-up window that may
include helpful information, depending on what the problem is.
12
System Control CenterHN9000 Satellite Modem User Guide –
1037577-0001 Rev. A
Chapter 2