Combined Boot User Manual Page 6
Enable x86 BootBIOS on HBAs Using the BIOS Utility
To use any of its features, x86 BootBIOS must be enabled on at least one installed HBA.
Prerequisites
• x86 BootBIOS is loaded on the HBA.
• The BIOS message is enabled.
To enable BootBIOS on the HBA:
1. Boot the system.
2. Press <Alt E> immediately (within five seconds) when the x86 BootBIOS message is displayed
to start the BIOS utility. A menu displays a list of HBAs (Figure 6).
Figure 6: BIOS Utility, HBA Listing
3. Select the HBA by entering the appropriate number.
4. The main configuration menu is displayed (Figure 7).
Figure 7: BIOS Utility, Main Configuration Menu