Filter
Top Products
20 IBM Desktop System HMM
Automatics Power-on Startup Sequence
This item allows you to select enabled if you want to
use a different startup sequence when your system is
started using the Automatic Power-On features.
•
First Startup Device:
The default is set to Network.
•
Second Startup Device:
The default setting is Hard Disk 0.
•
Third Startup Device:
The default is Disabled.
•
Fourth Startup Device:
When the previous startup device is set to
disabled, the fourth startup device will become un-
configurable. The default value is “Disabled“.
Error Startup Sequence
Select “Disabled“ if you want to start Setup whenever
a POST (Power-On Self Test) error occurs. Select
other options such as Network, Primary, Automatic, or
Disabled if you want to bypass Setup and use a
different startup sequence when a POST error
occurs. You will still be able to enter Setup using the
F1 key or on the POST error menu. The default is
set to “Network“.
Power-On Self Test
When set to “Quick”, which is the default, this
parameter allows the system to boot faster by
skipping some power-on self-test (POST) routines.
Power-On Logos
This parameter enables or disables to display the IBM
logo function. When set to “Enabled”, which is the
default, BIOS is in graphical mode and displays the
IBM logo while booting. If it is set to Disable, the
system will not display the logo on the screen.
Option Key Display
This option controls the prompt of the system
software option keys (such as the F1 and Esc keys)
when the system is turned on. This may or may not
affect the function of a specific key. Select “Enabled“
to display the prompts.