Filter
Top Products
24 IBM Desktop System HMM
Power-On Password”.
3. Press Esc to return to Setup main menu.
4. Select Save Settings and Exit Setup to save and
exit Setup and reboot the system.
Administrator Password
For the basic administrator password setting, follow
the same rule with Power-On Password to set up,
change, or delete a password.
Require Administrator Password when flashing
If it is set to No, the Administrator password will not
be required when updating the system software. The
default setting is “Yes”.
Power-On Password Changeable by User
This parameter enables you to change or not to
change the Power-On Password with the
administrator password set. The default is “No”.
Require Power-On Password on Warm boot
When set to “Yes”, the Power-On Password will be
required whenever the system is restarted. If you
select No, the Power-On Password will only be
required when the system is started with a cold boot.
Adapter ROM Security
If set to”Yes”, the keyboard will be locked during
adapter ROM initialization. This can be used in
conjunction with an Administrator password to
prevent the use of adapter ROM based utilities. The
default is set to “No“.
Asset ID
This enables wireless RF communication for Asset
ID. The default is “Disabled“.
Advanced Setup
IMPORTANT:
Items on the following menus control
advanced hardware features. If they are
configured incorrectly, the system might
malfunction.