Filter
Top Products
Symptom-to-FRU index 161
ServeRAID POST (ISPR) error codes
The ISPR (Interrupt Status Port Register), BCS (Basic Configuration Status), and ECS
(Extended Configuration Status) codes identify the controller state.
Note: Do not replace a system board containing a ServeRAID adapter unless such a
replacement is a specifically recommended Action.
01298001 (No update data for
processor 1)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 1
01298002 (No update data for
processor 2)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 2
01298003 (No update data for
processor 3)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 3
01298004 (No update data for
processor 4)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 4
01298101 (Bad update data for
processor 1)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 1
01298102 (Bad update data for
processor 2)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 2
01298103 (Bad update data for
processor 3)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 3
01298104 (Bad update data for
processor 4)
1. Ensure all processors are the same stepping level
and cache size.
2. Processor 4
I9990301 (Fixed boot sector
error)
1. Hard Disk Drive
2. If RAID system, refer to the ServeRAID Hardware
Maintenance Manual for more information.
3. SCSI Backplane
4. Cable
5. I/O Legacy Board
I9990305 (Fixed boot sector
error, no operating system
installed)
1. Install operating system to hard disk drive.
I9990650 (AC power has been
restored)
1. Check cable
2. Check for interruption of power supply
3. Power Cable
Error Code/Symptom FRU/Action