IBM 7RY Computer Hardware User Manual


 
Using IBM ServeRAID 133
4. Ensure that the screen has Yes next to BIOS Support for Reading Partition
Tabl es . If not, use the Up Arrow (Ν) and Down Arrow () keys to highlight BIOS
Support for Reading Partition Tables; then, press Enter to change No to Yes.
Note: You must perform this next step to save the new settings.
5. Highlight Save Configuration to the ServeRAID Controller then, press Enter.
The program displays an Okay message and then returns you to the Main Menu of
the Mini-Configuration program.
6. Press Ctrl+Alt+Del to restart the system.
Running the IPSSEND program
You can run the IPSSEND program from the operating system command line. When
you run the IPSSEND program with no parameters, a list of available functions and
their specific parameters appears. The following instructions are for running the
IPSSEND program with no parameters. The available functions and their parameters
are described in the sections that follow:
To run the IPSSEND program:
If you are using OS/2 or Windows NT:
1. Type:
c:\ipsadm\ipssend
where c is the drive letter of the drive where OS/2 or Windows NT is
installed.
2. Press Enter.
If you are using NetWare:
1. From the console, type:
load ipssend
2. Press Enter.
If you are using DOS:
1. Insert the startable IPSSEND diskette into diskette drive A; then, type:
a:\ipssend
where a is the drive letter of the diskette drive.
2. Press Enter.
If you are using Linux, SCO OpenServer, or UnixWare:
1. Type:
/usr/bin/ipssend
2. Press Enter.
Using the IPSSEND program
There are five types of IPSSEND functions:
•FlashCopy
Server roll-out
Error-recovery
Problem-isolation and debug
RAID configuration