Filter
Top Products
156 Hardware Maintenance Manual: xSeries 250
129 (Internal cache error) 1. Processor
2. Optional processor (if installed)
3. Processor/PCI board
151 (Real time clock error) 1. Run Diagnostics
2. Battery
3. I/O Legacy Board
161 (Real time clock battery
error)
1. Run Configuration/Setup
2. Battery
3. I/O Legacy Board
162 (Device Configuration
Error)
Note: Be sure to load the
default settings and any
additional desired
settings; then, save the
configura-tion.
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. I/O Legacy Board
163 (Real-Time Clock error) 1. Run Configuration/Setup
2. Battery
3. I/O Legacy Board
164 (Memory configuration
changed, see "Memory Settings"
on page 49.)
1. Run Configuration/Setup
2. DIMM
3. Processor/PCI Board
175 (Hardware error) 1. I/O Legacy Board
2. Processor/PCI Board
176 (Computer cover or cable
cover was removed without a
key being used)
1. Run Configuration/Setup
2. I/O Legacy Board
3. C2 Security Switch
177, 178 (Security hardware
error)
1. Run Configuration/Setup
2. I/O Legacy Board
184 (Power-on password
corrupted)
1. Run Configuration/Setup
2. I/O Legacy Board
185 (Drive startup sequence
information corrupted)
1. Run Configuration/Setup
2. I/O Legacy Board
186 (Security hardware control
logic failed)
1. Run Configuration/Setup
2. I/O Legacy Board
187 (VPD serial number not set.) 1. Set serial number in Setup
2. I/O Legacy Board
188 (Bad EEPROM CRC #2) 1. Run Configuration/Setup
2. I/O Legacy Board
189 (An attempt
was made to access the server
with invalid passwords)
1. Run Configuration/Setup, enter the administrator
password
2. I/O Legacy Board.
Error Code/Symptom FRU/Action