Filter
Top Products
Installing options 69
8. Attach one end of the SCSI cable to the selected internal SCSI channel connector
on the ServeRAID adapter. Make sure that the other end of the SCSI cable is
attached to the appropriate channel connector on the SCSI backplane.
Attention: When you route the SCSI cable, do the following:
• Do not block the ventilated space in front of the fan assembly.
• Do not place the SCSI cable fold on top of the fan assembly.
• Do not route the SCSI cable over the memory board assembly.
The following illustration shows how to route one SCSI cable to the ServeRAID
adapter.
SCSI cable
ServeRAID adapter
SCSI connector on
hard disk drive
backplane
SCSI connector on
power backplane