Filter
Top Products
Chapter 3. Replacing the ARTIC186 8-Port PCI Adapter
Use these procedures to remove a failing adapter and to install a replacement.
Removing the Adapter
Note: The following steps are an example of adapter removal. For instructions specific to your computer,
refer to the hardware and service information that came with your computer.
1. Turn the computer off.
2. Disconnect the power cords from the electrical outlets.
3. Disconnect all cables from the rear of the system unit.
4. Remove the system unit cover.
5. Open the card retainer by loosening the screw.
6. Remove the adapter retaining screw.
7. Grasp the adapter by the top corners and lift straight up.
Copyright IBM Corp. 1998, 1999 3-1