Filter
Top Products
DO YOU WANT TO TEST A CO-PROCESSOR ADAPTER SHOWN
AS PRESENT ON THE DISPLAYED SCREEN?
Note: A co-processor adapter is present if a “Y” appears in the
second (Present) column.
NO Press 9; then press Enter to terminate the diagnostics test.
YES Type the card number (0, 1, 2, or 3—displayed in the first
column) of the adapter you want to test. Then press Enter
and continue to the next page.
The message at the bottom of the screen is displayed. The
co-processor adapter being tested is highlighted.
Note: If the test continues to run beyond 150 seconds, replace the
co-processor adapter being tested.
IBM REALTIME INTERFACE CO-PROCESSOR
AND X.25 INTERFACE CO-PROCESSOR
_____________________________________________________
| | | | | | |
PRESENT | | STG | PWR | L | B | PORTS |
____ | CARD | SIZE | ON | V | U | __________|
CARD| | ADDR | KB | ERR | L | S | | ADAPTER |
____|___|______|______|______|____|___|___|__________|
| | | | | | | | | |
| | Y | 2A | 512 | | 1 |32 | 1 | V24/V35 |
| | | | | | | | | X21 |
| 1 | Y | 6A | 512 | | 11 |32 | 1 | V24/V35 |
| | | | | | | | | X21 |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
|____|___|______|______|______|____|___|___|__________|
TESTS RUNNING. TAKES UP TO 15 SECONDS
A B C D E F G H I J K L M
ᑍ 3F3Fᑍ ᑍ ᑍ ᑍ ᑍ ᑍ ᑍ ᑍ ᑍ ᑍ
If an error code is displayed, record the card address and the error
code; then go to page 4-12. Otherwise, continue on page 4-13.
Problem Determination Procedures 4-11