IBM C2B 2.25 Brick On Sled carrier 128-pin HPC Computer Drive User Manual


 
USER RESPONSIBLE FOR VERIFYING VERSION AND COMPLETENESS
OEM FUNCTIONAL SPECIFICATION ULTRASTAR XP (DFHC) SSA MODELS 1.12/2.25 GB - 1.0" HIGH
Preface
This document details the product hardware specification for the Ultrastar XP SSA family of Direct Access
Storage Devices. The capacity model offerings are 1.12, 2.25, and 4.51 GBytes (see 2.1.1, “Capacity
Equations” on page 13 for exact capacities based on model and block size). The form factor offerings are
'Brick On Sled' carrier and 3.5-inch small form factor (refer to 4.1.1, “Weight and Dimensions” on page 51
for exact dimensions).
This document, in conjunction with the Ultrastar XP (DFHC) SSA Models Interface Specification, make
up the Functional Specification for the Ultrastar XP SSA (DFHC) product.
The product description and other data found in this document represent IBM's design objectives and is
provided for information and comparative purposes. Actual results may vary based on a variety of factors
and the information herein is subject to change. THIS PRODUCT DATA DOES NOT CONSTITUTE A
WARRANTY, EXPRESS OR IMPLIED. Questions regarding IBM's warranty terms or the methodology
used to derive the data should be referred to your IBM customer representative.
Note: Not all models described in this document are in plan. Contact your IBM customer representative
for actual product plans.
Source filename=PREFACE IBM Corporation Page 3 of 87