Filter
Top Products
Hardware Management Console (HMC) Case Configuration Study for LPAR Management 13
Table 6 Memory allocation
Enabling ssh access to HMC
By default, the ssh server on the HMC is not enabled. The following steps
configure ssh access for node julia on HMC. The procedure will allow node julia
to run HMC commands without providing a password.
Enabling the remote command execution on HMC.
In the management area of the HMC main panel, select HMC Management →
HMC Configuration. In the right panel select Enable or Disable Remote
Command Execution and select Enable the remote command execution
using the ssh facility (see Figure 5).
Figure 5 Enabling remote command execution on HMC
The HMC provides firewall capabilities for each Ethernet interface. You can
access the firewall menu using the graphical interface of the HMC. In the
“Navigation Area” of the HMC main panel, select HMC Management →
Memory (MB)
Partition name Min Desired Max
nicole_vio 512 1024 2048
oli 1024 5120 8192
julia 512 1024 8192