Filter
Top Products
38 Hardware Management Console (HMC) Case Configuration Study for LPAR Management
A new system is shipped with a default IP-addresses. You can change these
IP-addresses by connecting your laptop to either T1 or T2 of the CEC. Assign an
IP-address to your laptop’s interface that is in the same network as the
respective network adapter of your CEC. For T1, it is network 192.168.2.0/24
and for T2 192.168.3.0/24. Do not use the same IP-addresses as the CEC
already have assigned.
Run a browser on your laptop and type in the IP-address of the respective
network adapter of the CEC:
https://192.168.2.147
Log in to the ASMI menu using a username and a password. In the main ASMI
panel, select Network Services → Network Configuration. Using the menu
from Figure 24, you can configure the FSP Ethernet interfaces eth0 and eth1.
Figure 24 Configuring the FSP IP address using the ASMI menu
Note: For p510, p520, p550, and p570 at first startup, a default IP address is
configured on the FSP interfaces if an DHCP server is not available:
eth0 (external T1): 192.168.2.147
eth1 (external T2): 192.168.3.147