Filter
Top Products
IBM TotalStorage DR550 SMB Version 1.0 ------ 27 May 2005 Page 32
IBM Storage Systems Copyright © 2005 by International Business Machines Corporation
1 Start Install Now with Default Settings
>>> 2 Change/Show Installation Settings and Install
3 Start Maintenance Mode for System Recovery
88 Help ?
99 Previous Menu
>>> Choice [1]: 2
Set and Verify Installation Settings
1. In the Installation and Settings screen, verify the installation settings are correct by checking the
method of installation (New and Complete Overwrite), the disk or disks you want to install, the
primary language environment settings, and the installation options.
A summary of selected options displays. Confirm your selections and press Enter to begin the BOS
installation. The system automatically reboots after installation is complete.
Otherwise, go to sub-step 2.
2. To change the System Settings, which includes the method of installation and disk where you
want to install, type 1 in the Choice field and press Enter.
Installation and Settings
Either type 0 and press Enter to install with current
settings, or type the
number of the setting you want to change and press Enter.
1 System Settings:
Method of Installation.............New and
Complete Overwrite
Disk Where You Want to Install.....hdisk0
>>> Choice [0]: 1
3. Type 1 for New and Complete Overwrite in the Choice field and press Enter. The Change Disk(s)
Where You Want to Install screen now displays.
Change Disk(s) Where You Want to Install
Type one or more numbers for the disk(s) to be used for
installation and press
Enter. To cancel a choice, type the corresponding number
and Press Enter.
At least one bootable disk must be selected. The current
choice is indicated
by >>>.
Name Location Code Size(MB) VG Status
Bootable
1 hdisk0 04-B0-00-2,0 4296 none
Yes
2 hdisk1 04-B0-00-5,0 4296 none
Yes