Filter
Top Products
IBM TotalStorage DR550 SMB Version 1.0 ------ 27 May 2005 Page 8
IBM Storage Systems Copyright © 2005 by International Business Machines Corporation
Accessing the Switch(es)
If you need to access the switch(es) to review the zoning information, error messages, or other
information, you will need to connect Ethernet cables (provided by the customer) to the Ethernet port
on the switch. These cables would also need to be connected to the customer network. You can
then access the switch using the IP address. The Userid is ADMIN and the password is
PASSWORD. You should change this password to confirm with site security guidelines.
If you should need to review the configuration or zoning within the switches, the IP address for the
switch is 192.168.1.31. This address should not be changed. To gain access to the switch via the IP
network, you will need to provide an Ethernet cable and ports on your existing Ethernet network.
Once the connections have been made, then you can connect to the IP address and use the
management tools provided by the switch.
The zoning used with DR550 SMB is the default zoning shipped with the switch. That is, one zone
for all 8 ports.
For more information, 2005-H08 data sheets can be downloaded from:
http://www.storage.ibm.com/ibmsan/products/2005/h08/pdf/datasheet.pdf