Filter
Top Products
Installing screws
in the 500-sheet
drawer and caster
base
Drawer bottom
1
Remove a 500-sheet drawer from the carton.
2
Remove all packing material and tape from the drawer and
paper tray.
3
If you are using a table or printer stand, then place the 500-
sheet drawer in that location and go to step 8, otherwise
continue to step 4.
4
Use a flat tip screwdriver to remove the rubber feet from the
bottom of the 500-sheet drawer.
5
Place the drawer on the caster base.
6
Insert two long stabilizer screws (1) into the pockets of the 500-
sheet drawer.
The screws go through the drawer, caster cover, and into the
caster frame assembly.
7
Tighten the screws securely.
8
If you have additional 500 or 250-sheet drawers, go to
“Installing additional 500-sheet drawers” on page 10, “Installing
250-sheet drawers” on page 10 otherwise, go to “Installing the
duplex unit” on page 11, or “Positioning the printer” on
page 12.
Assemble paper handling options
9