Filter
Top Products
Performing browser fax
setup
Note:
Configuration is a
task usually done by a
network administrator. If you
are prompted for a password
during the following
instructions, see your
network administrator for
help.
Note:
During printer power
up, if the print server is
configured to use Network
Time Protocol (NTP) time,
the current date and time
are provided. However, you
must set the time zone to
get the correct time.
After the IP address is set, use your browser to set the required fax
information. You can also configure the MFP to route faxes received
through the fax modem port on the print server (with modem) to an
output bin on your printer.
1
Type the IP address of the MFP in the URL field of your
browser (for example, http://192.168.236.24), and then press
Enter
.
2
Click
Configuration
.
3
Under the MFP heading, click
Fax Setup
.
4
Click
Configuration
.
If you are changing fax modes, you must click
Submit
before
you can access the configuration page.
5
Enter the required FCC information:
•
Current date and time
•
Station name (personal name or company name)
•
Station number (fax phone line number)
6
Select the Time Zone, such as Eastern (USA and Canada,
Eastern Standard Time). This sets the required information.
7
Set your options for Fax storage, Output bin, Rings to Answer,
and so on.
For a complete list of receive fax options, refer to the online
documentation on the MFP CD.
8
After you finish entering the information, click
Submit
.
Set send and receive fax information
34