Filter
Top Products
Attaching decals
1
Attach the numbered decals to the recessed areas on the
and overlay
optional drawers and trays.
2
If English is not your preferred language:
a Locate the adhesive overlay packaged with your printer.
b Peel the backing off the overlay.
c Align the holes in the overlay with the buttons on the
operator panel, and then press it into place.
d Peel the covering away from the overlay.
Refer to the publications CD for instructions on changing
the language of the text displayed on the operator panel.
Loading paper Complete these instructions to load paper into any of the standard or
optional trays. All trays are loaded in the same way.
1
Remove the tray.
2
Adjust the length and width guides to the correct position for
the size of paper you are loading.
3
Flex the sheets of paper back and forth to loosen them, and
then fan them.
Do not fold or crease the paper. Straighten the edges of the
stack on a level surface.
4
Place the paper into the tray and slide the width guide until it
lightly rests against the edge of the paper.
5
Insert the tray.
Set up the printer
18