Filter
Top Products
12
Assemble paper handling options
5
Place the duplex unit on top of any installed drawers.
If you are not using a caster base, place the duplex unit on a
table or optional printer stand and go to “Positioning the
printer.”
6
Make sure the drawers and duplex unit lock together securely.
7
Insert two long stabilizer posts (3) into the pockets of the
duplex unit.
The posts go through the duplex unit and into the top of the
screws of the previously installed drawer.
8
Tighten the posts securely.
Positioning the
printer
1
Open the printer box and then remove all items from the box.
2
Make sure you have the following items:
•
Printer
•
Power cord
•
Setup Guide with a publications CD
•
Operator panel language overlays
•
Drivers CD
•
Wire bail
•
Operator panel protector overlay
3
Place all items except the printer aside for later use.
4
If you are using a table or printer stand, then place the printer
in that location and go to step 9 on page 13, otherwise continue
to step 5.
5
Gently place the printer on its back.
6
Use a flat tip screwdriver to remove the rubber feet from the
bottom of the printer.
7
Gently place the printer right side up.