IBM PC 300GL Personal Computer User Manual


 
6 PC 300 GL and 300 PL
For memory expansion, the system board provides two dual inline memory module
(DIMM) connectors and supports 133 MHz DIMMs in sizes of 64 MB, 125 MB, and 512
MB. 100 MHz DIMMs may be used in systems with a 100 MHz FSB.
The following information applies to system memory:
Synchronous dynamic random access memory (SDRAM) is standard.
The maximum height of memory modules is 6.35 cm (2.5 in.).
Only PC 100 and PC 133 industry-standard, gold-lead DIMMs are supported.
DIMM connectors do not support RAMBUS Inline Memory Modules (RIMMs).
The PC 300GL supports error-corrected code (ECC). A mix of nonparity types
configures as nonparity.
BIOS sepcific auto-configure, auto-detect maximum system memory.
For information on the pin assignments for the memory modules connectors, see
“System memory connector” on page 34.
The following table shows some possible configurations for the supported DIMMs.
Table. 1. Memory Configuration (MB)
Total Memory Mem O Mem 1
64 64 0
96 64 32
128 64 64
128 128 0
160 128 32
192 128 64
256 128 128
384 256 128
512 256 256
512 512 0
578 512 64
640 512 128
1024 512 512