IBM PC 300PL Personal Computer User Manual


 
Chapter 2. System board features
System board, Types 6584 and 6594
Riser card layouts
The PC 300PL Personal Computer uses a riser card for expansion. The riser card contains expansion
slots that connect the adapters to the peripheral component interconnect (PCI) and industry standard
architecture (ISA) buses and connectors for the integrated drive electronics (IDE) drives and diskette
drives. The following illustrations show the expansion slots on the riser card. The PCI slots are on the
front of the riser card, and the power and IDE drive connectors are on the back of the riser card.
PC 300PL — desktop model
Some desktop models have a riser card with four PCI connector slots. The following illustration shows the
location of the slots on the PCI riser card.
1Microprocessor
2RIMM connector 1
3RIMM connector 2
4AGP slot
5Recovery jumper
6Battery
1SCSI LED connector
2Wake on LAN connector
3Power connector (back)
4Primary IDE connector (back)
5Secondary IDE connector (back)
6Diskette drive connector
7Fan connector
8Tamper detector connector
9Speaker connector
1RFID connector
11Power LEDs
12Alert on LAN connector
13212-pin connector
14CD audio connector
15PCI slot 1
16PCI slot 2
17PCI slot 3
18PCI slot 4
Chapter 2. System board features 13