Filter
Top Products
Preface
This
Technical Information Manual
provides information for the IBM
PC 300
Types 6584 and 6594. It is
intended for developers who want to provide hardware and software products to operate with these IBM
computers and provides an in-depth view of how these IBM computers work. Users of this publication
should have an understanding of computer architecture and programming concepts.
Related publications
In addition to this manual, the following IBM publications provide information related to the operation of the
IBM PC 300PL Personal Computer:
PC 300PL User Guide
This publication contains information about configuring, operating, and maintaining the PC 300PL
Personal Computer, as well as installing new options in the PC 300PL Personal Computer. Also
included are warranty information, instructions for diagnosing and solving problems, and information on
how to obtain help and service.
Understanding Your Personal Computer
This online document includes general information about using computers and detailed information
about the features of the PC 300PL Personal Computer.
About Your Software
This publication (provided only with computers that have IBM-preinstalled software) contains
information about the preinstalled software package.
Hardware Maintenance Manual
This publication contains information for trained service technicians. It is available at
http://www.ibm.com/pc/us/cdt/hmm.html on the World Wide Web, and it can also be ordered from IBM.
To purchase a copy, see the "Getting Help, Service, and Information" section in
PC 300PL User
Guide
.
Compatibility Report
This publication contains information about compatible hardware and software for the PC 300PL
Personal Computer. It is available at http://www.ibm.com/pc/us/cdt on the World Wide Web.
Network Administrator's Guide
This publication contains information for network administrators who configure and service local area
networks (LANs). Look for this publication at http://www.ibm.com/pc/us/cdt on the World Wide Web.
Terminology usage
Attention: The term
reserved
describes certain signals, bits, and registers that should not be changed.
Use of reserved areas can cause compatibility problems, loss of data, or permanent damage to the
hardware. When the contents of a register are changed, the state of the reserved bits must be preserved.
When possible, read the register first and change only the bits that must be changed.
In this manual, some signals are represented in a small, all-capital-letter format (-ACK). A minus sign in
front of the signal indicates that the signal is active low. No sign in front of the signal indicates that the
signal is active high.
The use of the term
hex
indicates a hexadecimal number.
Copyright IBM Corp. September 1999 vii