Filter
Top Products
If the distance between the Access Point and the
system is too far, the test may report failure even if
the device is properly working. If the encryption is
enabled on the Access Point, the test program
cannot properly communicate with the Access Point
to test the device, and will report failure.
Due to the nature of wireless connection, the test
may report failure with ″No LinkTest response
received″ error message in the log, even if the
device is working properly. When the test failed with
this error, please repeat the test for a few times.
The device may be working properly unless the
same error persists.
Audio Checkout
Do as follows:
1. Boot from the diagnostics diskette and start the
program.
2. Go to Interactive Tests on the main menu and select
the Internal Speakers test.
3. If no sound is heard, replace the speakers.
Fan ASM Checkout
To check the fan ASM, do the following:
1. Boot from the diagnostics diskette and start the
program.
2. Go to Diagnostics on the main menu and select Other
Devices.
3. Follow the description in the window. If the test detects
a fan ASM problem, replace the fan.
Keyboard and Auxiliary Input Device
Checkout
Note: Remove the external keyboard if the internal
keyboard is to be tested.
If the internal keyboard does not work or an unexpected
character appears, make sure that the flexible cable
extending from the keyboard is correctly seated on the
connector.
If the keyboard cable connection is correct, run the
Keyboard Test. See “Running the Diagnostics” on page 27
for details.
If the test detects a keyboard problem, do the following
one at a time to correct the problem. Do not replace a
non-defective FRU.
12 ThinkPad s30, s31