Filter
Top Products
2-6 Chapter 2
Figure 2-4 Open Session Menu
The parameters displayed in this menu appear as data entry fields. To use
these fields:
1 Position the cursor to the left of each field in the menu, and enter the
appropriate data.
2 Press
F6
to save your data and exit the menu.
Table 2-3 describes the data fields in the Open Session menu.
Table 2-3 Open Session Menu Functions
Field Description
Session Type the name of your session in this field.
Auto Start Type a yes or a no in this field. Yes prompts
the emulator to start the session immediately
after exiting this menu.
Host Name Enter the name of the host to which you want to
connect.
Port Number In this field, type the number of the port to which
you want to connect. The recommended entry for
TN5250 is 23.
IBM Terminal Type Enter the type of terminal to which you are
connecting.
Open Session
*Session ______________________________
Auto Start no____
[Default Values]
*Host Name *DFLT__________________________ OCS_Gateway
Port Number *DFLT 23
*IBM Terminal Type *CALC____________ IBM-5251-11
Right Ctrl:Current Selection Tab:Next Field
F1:Help F3:Exit Menu F4:List
F5:Refresh F6:Save F12:Prev Menu