Filter
Top Products
IN1124/IN1126 – User’s Manual
Bottom view
12
3
4
5
6
For Ceiling Mount Boss 1
Screw SPEC.3-M4X0.7XL6.0
For Ceiling Mount Boss 2
For Ceiling Mount Boss 3
103.30mm
(
4.07"
)
56.50mm
(2.22")
70.50mm
(2.78")
ITEM LABEL DESCRIPTION SEE PAGE:
1.
32
Lamp cover Remove when changing the lamp.
2.
Elevator foot button Push to release the elevator foot.
13
3.
Elevator foot Use to adjust the height of the projector
4.
Lens cap hook To fasten the lens cap cover.
5.
13
Leveling foot Rotate the leveling foot to adjust angle position.
Only use with an InFocus ceiling mount system (p/n PRJ-MNT-UNIV).
See your InFocus dealer or go to
6.
Ceiling support holes
www.infocusstore.com.
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment over a period of 60 seconds.
– 5 –