Filter
Top Products
IN1124/IN1126 – User’s Manual
Advanced Features
Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu.
Press ▲▼ to move to the Advanced menu and then press Enter or ►. Press ▲▼ to move up and
down in the Advanced menu. Press ◄► to change setting values.
ITEM DESCRIPTION
Press Enter / ► to enter the OSD setting menu. See page
30 for more information on
OSD Menu Setting
OSD Menu Setting.
Press Enter/ ► to enter the Peripheral Test menu. See page
30 for more information
on
Peripheral Test
Peripheral Test.
After replacing the lamp, this item should be reset. See page
31 for more information
on
Lamp Hour Reset
Lamp Hour Reset.
Press ◄► to turn Low Power Mode on or off. This affects power consumption when
the projector is in standby. When this feature is on, the projector will use less than 1
watt of electricity in standby mode. When this feature is off, the projector will use 9
watts of electricity in standby mode.
Low Power Mode
– 29 –