Filter
Top Products
9
Powering up the Projector and Adjusting the Image
NOTE: Always use the power cord
that shipped with the projector.
1
Remove the lens cap.
2
Plug the power cord into the back of the projector, then plug it
into your electrical outlet. A surge-protected power strip is
recommended if power surges are common in your area.
FIGURE 9
Connecting the power cord
3
Turn on the projector by pressing the Power button on the
remote or keypad.
•
The Power LED on top of the projector lights. The Lamp
LED blinks until the lamp reaches full power.
FIGURE 10
LEDs
4
If you connected a video player, turn it on.
LR
Computer
Data Out Data In
Audio Out
Audio In
Remoto
RS-232
Video
Computer
LR
SC
Audio In
Video In
LR
Power
Power Source
Lamp
Check