Filter
Top Products
23
Users memory Save
This option saves your settings so you can quickly restore them
later. You must turn off Auto Adjust (page 19) to use the memory
save feature.
1
Use the Arrow buttons to move the cursor to Users Memory
Save, then press Enter.
2
Move the cursor to a memory number, then press Enter.
A file-naming dialog box appears.
3
Use the up arrow to increment through the letters and num-
bers to name the file. Use the right arrow to move to the next
space and enter another character.
4
Move the cursor (using the right arrow button) to Save & Exit
when you are finished, then press Enter.
5
Confirm your selection by choosing Yes or No, then press
Enter.
Users memory Load
This option sends saved settings to the projector.
1
Use the Arrow buttons to move the cursor to Users Memory
Load, then press Enter.
2
Move the cursor to the file you want to load, then press Enter.
3
Choose Yes to send the settings to the projector.
USER MEMORY SAVE 1/2
1.******** 2.********
3.******** 4.********
5.******** 6.********
7.******** 8.********
9.******** 10.********
11.******** 12.********
13.******** 14.********
15.******** 16.********
Cancel More
USER MEMORY SAVE 2/2
More
17.******** 18.********
19.******** 20.********
21.******** 22.********
23.******** 24.********
25.********
Cancel